Fardriver ND72450 Controller 48V-72V DC 200A BLDC Motor Motherboard with DKD Display
The default function for Fardriver controller :
Hall plug, Throttle signal (0-5V), Ignition, One-LIN Speed Signal, High Brake(12V), Three Speed, Temp Sensor, Reverse, Low Brake(0V), Flux Weakening Current, Anti-Theft, Cruise, Self Learning, Programming Port.
One Kit Contains
1 pcs x Fardriver ND72450 Controller
1 pcs x DKD One-LIN Display
1 pcs x Bluetooth Adapter
Controller SPEC
Fardriver Controller
1 Model: ND72450
2 Working Communication: Hall Sensor
3 Available Rated Battery Voltage: 48V-72V
4 Peak Battery Voltage: 88.7V
5 Available Motor Power: 3000W – 5000W
6 Defaut Throttle Working Voltage: 0V – 5V
7 Peak DC Current: 200A
8 Peak Phase Current: 450A
9 Mosfets Detail: 24 FET
10 Weight: 2.1kgs
11 Instaliing Size: 180mm * 118mm * 60mm
12 Controller Design: Sine Wave BLDC
13 Case Material: Aluminum
14 Support Programmable: PC & Phone
15 Suitable for electric bike, scooter, motorcycle, tricycle, kart, ATV
DKD DISPLAY SPEC
1) After power on, the self-test of the display is completed, then press and hold the left button for 10 seconds to enter the background and enter the password;
2) Left-click to adjust data, right-click to shift;
3) Password 153, set the perimeter(mm), the number of motor pole pairs, the offset, the unit mm is CC 1413mm (18inch tire perimeter) by default, after the setting is completed, long press the right button to enter the number of motor pole pairs(PL 24-10, pole pair number 24 by default) and offset(10);
4) Password 256, high and low gear (E, S gear) and normal gear selection, -2 is high and low gear, -0 is normal gear display;
5) Password 372, clear ODO, limited to 3 times;
6) Password 856, 48V, 60V, 72V,96V for selection, synchronized with the grid number, the lithium battery automatically takes the SOC, and automatically switches. If the lithium battery is changed to the other battery, and it must be powered on again;
7) Password 879, fixed voltage calibration, 48V, 60V, 72V, 96V, corresponding to the volatge setting;
8) Password 824, self-input voltage calibration;
9) Password 974, KMH/MPH switch setting;
10) Password 928, D gear light, N gear light off setting, can be turned off when only the liquid crystal display gear is needed
11) Password 919, to change the value of overvoltage and undervoltage. Front is overvoltage, back is undervoltage.
Reviews
There are no reviews yet.